Meshy Relief

meshy/relief

Turn one JPG, PNG, or WebP image up to 20 MB into a low or high relief. Download a 16-bit 2K PNG depth map, with optional GLB and STL meshes. Set a 20–250 mm size, emboss or engrave, adjust depth and base removal, and optionally bend the relief. Mesh resolution ranges from 512 to 2048; high-resolution or bent meshes can produce very large downloads.

Open in Studio Create an API key

Pricing

Includes our margin. Charged per request from your balance.

Per run: $0.88
Per run by variant: $0.88Default

Default variant: Default

Details

Provider: Meshy
Added: Nov 6, 2026

Options

Parameters this model accepts.

Parameter	Values	Default
`size_mm` Length of the photo's long side in millimeters, measured flat before any bend.	20 to 250 Default `60`	`60`
`variant` Relief depth. 'low' gives slight depth and finer detail (patterns, badges, seals); 'high' gives bold, sculptural depth (pets, portraits, characters).	low, high Default `low`	`low`
`bend_axis` Bend axis: 'xz' curls the left and right edges, 'yz' the top and bottom.	xz, yz Default `xz`	`xz`
`bend_mode` Bend the relief into a convex or concave curve.	off, convex, concave Default `off`	`off`
`image_url` One JPG/PNG/WebP image, up to 20 MB and 178956970 pixels.	Text	—
`bend_angle` Bend angle in degrees. Under 1 stays flat.	0 to 360 Default `60`	`60`
`remove_base` Cut away the background and build no base plate. A high removal_threshold, or a carving depth of 0, can produce an empty model.	On or off Default `off`	`off`
`carving_mode` 'emboss' makes the nearer parts stand out; 'engrave' inverts the depth so they are cut in.	emboss, engrave Default `emboss`	`emboss`
`mesh_resolution` Mesh points along the long side. At 2048, files reach about 150 MB (GLB) and 300 MB (STL), and a bend can push the STL to about 800 MB.	512 to 2048 Default `1024`	`1024`
`carving_depth_mm` Carving depth in millimeters. Defaults to 3 for 'low' and 6 for 'high'.	0 to 60	—
`base_thickness_mm` Base plate thickness in millimeters. Defaults to 1. Not allowed with remove_base.	0.1 to 10	—
`removal_threshold` Only used with remove_base. Depth below which the background is cut, on the depth map's 0-1 scale. Defaults to 0.01.	0.01 to 1	—
`enable_safety_checker` If set to true, input data will be checked for safety before processing.	On or off Default `on`	`on`
`should_generate_model` Generate the STL and GLB relief models. Set to false to return only the 16-bit depth map.	On or off Default `on`	`on`

Pricing

Details

Options

Search